| 09/11/2026 | All | New Driver | - Magewell Pro Convert NDI — new driver, available to all Edges regardless of version.
| | |
| 09/11/2026 | 2.3.1 | Update | - Raritan PDU PXO-2402R / PXO-2401CR — New command to rename an outlet; outlet names now refresh every minute.
| 2.3.1 | |
| 29/10/2026 | 2.3.0 | BugfixUpdate | - Update Edge command — now reported as failed when the Edge can't write the update request, instead of a false success.
- Infrastructure — The Edge now reports the proxy container's CPU, memory and host details.
| 2.3.0 | - A corrupted version tag no longer crash-loops the Edge; the wrapper falls back to the default tag.
|
| 18/10/2026 | 2.2.0 | New DriverUpdate | - LEA Connect Series — new driver.
- Raritan PDU PXO-2402R / PXO-2401CR — Outlet names are now shown in the device details.
| 2.2.0 | |
| 27/09/2026 | All | New Driver | - Yodeck — new driver, available to all Edges regardless of version.
| | |
| 27/09/2026 | 2.1.1 | UpdateBugfix | - Netgear M4250 — Each port now shows the name of the connected device, read from LLDP neighbor data.
- Crestron 4 Series — A failed login is now reported as a failed login instead of being silently discarded.
| 2.1.1 | |
| 23/09/2026 | All | New Driver | - BrightSign XD234 (Series 4) — new driver, available to all Edges regardless of version.
| | |
| 17/09/2026 | 2.1.0 | Update | - Infrastructure — Edge ID is now published to the NETGEAR Align controller UI, so the Edge can be claimed without SSH.
- Infrastructure — Zabbix trapper (port 10051) is now bound to loopback.
| 2.1.0 | - Docker API (port 2376) moved to the Unix socket, off the network.
- A crash-looping Edge no longer gets stuck on its backup image.
|
| 10/09/2026 | 2.0.1 | New Driver | - Raritan PDU PXO-2402R / PXO-2401CR — new driver.
- SnapAV WattBox — new driver.
| 2.0.1 | - Added Zabbix proxy config command.
- Retry of dockerd.
- Stale proxy images are dropped before pulling an update.
|
| 03/09/2026 | 1.4.4 | Update | - Netgear M4250 — Port data moved from telemetries to details. Structure change only, no data was added or removed.
| 1.4.4 | |
| 12/08/2026 | 1.4.3 | Bugfix | - Netgear M4250 — Per-port PoE status now reflects actual power delivery instead of PoE capability.
| 1.4.3 | |
| 10/08/2026 | 1.4.2 | Bugfix | - Panasonic Display — Fixed state handling: error received in standby mode was not handled.
| 1.4.2 | |
| 02/08/2026 | 1.4.1 | Bugfix | - Panasonic AW Camera — Fixed command error propagation and brightness.
| 1.4.1 | |
| 31/07/2026 | 1.4.0 | New Driver | - Panasonic AW Cameras — initial implementation.
| 1.4.0 | |
| 26/07/2026 | 1.3.10 | Bugfix | - Netgear M4250 — Fixed POE port false parsing.
| 1.3.10 | |
| 14/07/2026 | All | New Driver | - Sennheiser TeamConnect Bar S/M — pure Zabbix driver, available to all Edges regardless of version.
|
| 07/07/2026 | 1.3.9 | Bugfix | - Crestron 4 Series — Fixed bug where programs were not parsed correctly.
|
| 05/07/2026 | 1.3.8 | Update | - Netgear M4250 — Switch enhancements.
- Infrastructure — Added StartPollers workers from 5 to 10 and StartPingers workers from 1 to 10 to better handle heartbeat loads.
|
| 02/07/2026 | 1.3.7 | Bugfix | - Cisco Room Kit — Fixed missing and faulty diagnostics data.
- Panasonic RS232 — Fixed color temperature and Gamma telemetries for projector.
|
| 23/06/2026 | 1.3.6 | Update | - Cisco Room Kit — Added standby telemetry and commands: mic mute/unmute, speaker mute/unmute, volume increase/decrease, audio output selection, and set camera standby mode.
|
| 21/06/2026 | 1.3.5 | Update | - SNMP — Performance improvements: corrected sub-tree boundary check and GETBULK walk continuation.
|
| 09/06/2026 | 1.3.4 | Update | - Panasonic RS232 — Added “brightness” to telemetries.
|
| 03/06/2026 | 1.3.3 | New Driver | |
| 19/05/2026 | 1.3.2 | New Driver | |
| 15/05/2026 | 1.3.1 | Update | - Netgear — Added POE reboot command and minor fixes
|
| 14/05/2026 | 1.3.0 | Bugfix | - Samsung — Fixed driver breaking when non-default display ID is set
- Panasonic — Fixed some devices failing multiple commands
|
| 27/04/2026 | 1.2.9 | Bugfix | - Crestron — Fixed POST messages to enable reboot and standby
|
| 25/04/2026 | 1.2.8 | UpdateBugfix | - Panasonic — Added SHA256 encryption of authentication header
- Crestron 4series — Added support for several commands and more data from device
- SNMP — Added support for SNMP v1
- Netgear — Caused error in Sentry
|
| 15/04/2026 | 1.2.7 | UpdateHotfix | - Crestron 4 Series — Send serial number and firmware version to left panel
- Resolved workflow build failing
|
| 11/03/2026 | 1.2.6 | New Driver | - Kiloview — initial implementation
|
| 09/03/2026 | 1.2.5 | Update | - Biamp Tesira — SN and firmware version moved to left panel
|
| 02/03/2026 | 1.2.4 | New Driver | - Clockaudio CDT100 MK3 — first implementation (DRV-529)
|
| 24/02/2026 | 1.2.3 | Update | - Panasonic RS232 — Removed redundant telemetries and commands
|
| 04/02/2026 | 1.2.2 | Update | - Netgear — Added command to format fail error
- General — Fallback for semver enforcement on details and input type check
|
| 01/02/2026 | 1.2.1 | Update | - Crestron — Added support for DM-NVX Series response structure
- Cisco — SN and firmware sent alongside details
|
| 27/01/2026 | 1.2.0 | Bugfix | |
| 12/01/2026 | 1.1.9 | Bugfix | - Edge agent — Fix always generating new UUID if
proxy_name was edited with a text editor that adds newline automatically
|
