Biamp — Device Setup Parameters

These Biamp models need parameters entered in Xyte after they're claimed. Families that need the same parameters are grouped together below.

Username, Password, Port

Applies to:

• TesiraLUX Series
• Tesira Text Protocol (TTP)

Parameters

• Username (optional) — The user name used for authentication when connecting to and retrieving data from the Tesira device.
• Password (optional) — The password used for authentication when connecting to and retrieving data from the Tesira device.
• Port (optional) — An optional field specifying the network port on which the Tesira Text Protocol (TTP) service is accessible. If not provided, the default TTP over SSH port is used (22).

The Add credentials dialog for these models shows exactly these fields:

Where to enter them

Both routes open the Add credentials dialog shown above.

From the Devices table — select one or more devices that need these same parameters (they show Missing Credentials), then click Add Credentials in the action bar. The button is enabled only when every selected device has identical requirements (usually the same model):

From the device page — open the device (it shows the isn't reporting data yet banner), then ⋯ → Edit:

Once saved, the Missing Credentials flag clears and the device starts reporting — your confirmation it worked.